Best DIY Gutter Guards – Guide & Reviews

Installing gutters is a brilliant idea that helps you trap rainwater. However, if you do have a gutter guard, you might end up experiencing a hard time cleaning your gutter. Let's learn how to install best DIY gutter guards.

If you leave your gutter open, there is the possibility of debris and leaves clogging the gutter. When this happens, mold and mildew begin forming and it also becomes a breeding area for most insects.

To prevent all these problems from taking place, install the best gutter guards. There are different types of gutter guards available so it can be pretty hard to pick the right one. Do you want a fine mesh, screen or surface tension gutter guard?

I have researched and tested different types of gutter guards. Here are my reviews of five best DIY gutter guards that you should consider installing.

Best DIY Gutter Guards

LeafsOut 5" DIY Micro Mesh Rain Gutter Guard System

If you do not want to experience a hard time cleaning a clogged gutter, ins​​​​tall the LeafsOut 5" DIY Micro Mesh Rain Gutter Guard. Installing is easier and it will only take you a few minutes and it does come with installation screws.

It consists of a black water siphon control strip on the bottom side of the mesh that literally pulls water into the rain gutter.  The gutter guard is adaptable and can easily be installed on other types of gutters and roofs.

Its front aluminum edge has a stop that will push up against the inside front edge of the rain gutter and a rest that will fit on top of the front edge and can be screwed on with included self-tapping screws.

The stainless steel V-bend filter mesh is flexible and rust resistant, therefore, staying in a good condition for a long period of time. It gives you an easy time when it comes to cleaning the gutter because the gutter guard eliminates clogging and you never have to clean the gutter after rain again.

Sunlight doesn't affect this gutter guard and it will not degrade like other plastic and foam gutter guards. Another amazing thing about it is that it is pest-free, thanks to the fine holes that keep wasps and other insects away.

Pros

  • check
    Highly durable
  • check
    Eliminates gutter clogging
  • check
    Rust resistant
  • check
    Stainless steel mesh
  • check
    Easily installed on a variety of gutters

Cons

  • power-off
    Competitively Large
  • power-off
    Not So Flexible

NoLeafs Rain Gutter Guards for 4-6" Gutters

Unlike other DIY gutter guards, the NoLeafs rain gutter guard is uniquely designed so that it simply slips under the roof shingle and rests on top of the roof-deck or water-barrier to clamp the gutter guard in place and stabilize its structure.

Its metal front is attached to the front top of the gutter via three self-tapping screws for each four-foot section and the coating on the metal provides galvanic isolation to protect the rain gutter from any form of corrosion.

The gutter guard easily fits on the existing rain gutters and there is no need of replacing the existing gutter. In the back edge, there is no metal strip and therefore it will not raise the edge of the roof material noticeably.

Pros

  • check
    Compatible to existing rain gutters
  • check
    Keep pests away
  • check
    No damage to existing roof
  • check
    Highly durable
  • check
    High quality

Cons

  • power-off
    Cutting the edges might be dangerous
  • power-off
    Too much cutting before installation

5" DIY Feet Micro Mesh Rain Gutter Guard

If you find cleaning gutters one of the most difficult tasks, try installing a mesh gutter guard and you will not have to clean clogged gutters. A mesh gutter guard is not only easy to install but also designed with very tiny spaces that can't clog with seeds. It is also very easy to blow or clean.

One of the best mesh gutter guards I can recommend is the 5" DIY Feet Micro Mesh Rain Gutter Guard. It will keep leaves, pine needles, and roof sand grit from your gutter and you are never going to clean the gutter by yourself again.

It is very much strong as it can handle over 150 inches of hourly rainfall and it will not experience any kind of damages. All you need to do is follow up the simple instructions in the user manual and install it at a slight angle so that most debris sheds off from the winds and the rains.

One of the things that makes it popular the fact that you can easily install it on any type of gutter or roof and therefore you do not have to replace the already existing gutters.

Pros

  • check
    85 self-tapping screws
  • check
    Installs on any gutter or roof type
  • check
    Aluminum support frame
  • check
    Keeps out leaves and pine needles from your gutter
  • check
    Very Durable Gutter Gurads

Cons

  • power-off
    Sharp edges
  • power-off
    A little bit expensive

Aluminum Small Hole Drop In Leaf Guard For Gutters

The Aluminum Small Hole gutter is one of the guard gutters that is very much affordable. You only get to spend a small amount of money to purchase an effective gutter guard for your gutter. The gutter guard allows you to enjoy the cleanest rain gutter and the best drainage system for your house.

It is strongly built to withstand harsh and tough weather conditions during the heavy rains. It is easy to use as it only allows water to pass through and filtering out the leaves directing them away from the gutter.

The small hole design of the gutter guard gives you the best debris protection of any expanded metal leaf guard on the market. When it comes to installation, you just slide the back edge of the leaf guard under the leading edge of your shingle and secure the front edge of the leaf guard to the front of the gutter with self-tapping screws.

It is designed to be top quality and highly durable to last you long. The gutter guard is a must buy for your gutter and I do promise you that it will be the best money you will ever invest.

Pros

  • check
    Affordable
  • check
    Easy to install
  • check
    Self-tapping screws provided
  • check
    Keeps twig and leaves out of the gutter
  • check
    Great quality

Cons

  • power-off
    Sharp dangerous ends
  • power-off
    Too much cutting

A-M Aluminum Gutter Guard 5"

The A-M Aluminum Gutter Guard 5" solves your gutter problems at a reasonable cost. It will never rust out and it is unaffected by the sun. It is one purchase that you will always be happy with for investing your money on the gutter guard.

The gutter guard fits perfectly on any other types of gutters without any adjustments needed. The guard gutter comes with instructions for you to follow on how to install the gutter guard and how to use so that you will have an easy time.

When it comes to elimination of clogging, it is the best as it leaves your gutter clean. It is made of 100 percent aluminum and there it is rust resistant and it will not rot even after use for a long period of time.

The aluminum construction also makes it strong and last long despite rough weather conditions and strong rains. The product is amazingly constructed and therefore it doesn't deteriorate despite a long period of use and therefore it will always remain new and perfect for your gutter.

Pros

  • check
    Ease of installation
  • check
    Virtually invisible from the ground
  • check
    Handles downpours with 380 holes per foot
  • check
    Works with all hangars
  • check
    Rust resistant

Cons

  • power-off
    Zip screws not included.
  • power-off
    Designed specifically for hidden hangars

Best DIY Gutter Guards Buying Guide

When looking to purchase the best DIY gutter guards, there are a couple of things that you need to check carefully in order to have an easy time when it comes to installation. Selecting the best gutter guards always ensure quick and easy installation.

The Installation

Each gutter guard has a different way of installation; it's because they were constructed differently and the difference on functionality as well. There are those that are installed right on top of your existing gutter. These gutter guards do not to bother the shingles in any way.

On the other hand, there are those that require installation under your first row of shingles which is not a good idea because it will bother the shingles by causing roof leaking or water overshooting. Therefore, you should know the type of DIY gutter guards to go for considering the already installed gutters.

The Construction

How a DIY gutter guard is made should be some of the priorities when it comes to purchasing a gutter guard. There are different materials used in the construction of a gutter and they all differ when it comes to quality and the durability.

However, you should always go for those made of aluminum or steel because they are durable and last longer compared to those that are made of plastic.

You should ensure that the material used is designed to last long and stand strong despite the rough weather conditions that may seem to hinder its functioning.

Technology

The modern technology has come with great benefits that outshine the disadvantages. This is evident in the DIY gutter guards that are brand new quality in the market. 

With good technology comes modernized construction of the gutter, modernized installation and also high quality and durability. With high-level technology, you can be sure of a gutter guard that will not give you any problems because they are perfectly designed to do the job perfectly.

Quality

The quality of a DIY gutter guard does matter a lot because. Of course, many of us will always prefer a top quality gutter guard compared to a low-quality one.

The material used in the construction of the gutter guard tells more about the gutter guard and so is the technology used when coming up with the guard.

This is because, for a high-quality gutter guard, it will last for a longer period of time compared to the one that is of low quality. Quality is a must look for you in order to purchase the best DIY guard for your gutter.

Durability

I know a good number of us are not fans of replacing things after a short time after investing a good amount of money on them. That is why we also go for products that are designed to last for a long period of time.

Before purchasing a DIY gutter guard, you should ensure that it is constructed in such a way that it is durable. Durability goes hand in hand with the quality of the gutter guard.

It is a good idea to invest money in a gutter guard that will last long so as to get rid of worries about replacing it anytime soon.

Final Words

Gutter guards prevent expensive damages associated with gutters that are clogged and the tasks of cleaning them almost all the time. It is a must-have for your gutter unless you have the time and the energy to spend on cleaning your gutter.

I would recommend any of the above best DIY gutter guards in order for you to have the best experience that comes with the installation of the gutter guard.

It is one the greatest addition to your home and you should always consider it for your gutter. Let the gutter guard save you your time and also your money so you can sit back and not worry about the cleanliness of your gutter.

Best Gutter Leaf Guards - Guide & Reviews

Jeremy Walter
 

Hi, My Name is Jeremy Walter. I was professionally working as a mason and founder of homerudder.com. I’m an expert of Home Improvement Tools. Thus I started this blog to help people finding best home improvement accessories.

%d bloggers like this: